5/5
Compatible with: DCF899B Type 1, DCF899B Type 3, DCF899M1 Type 1, DCF899M1 Type 3, DCF899P1 Type 1, DCF899P1 Type 3, DCF899P2 Type 1, DCF899P2 Type 3
Measures approximately 2.25 X 1.85 X 0.95 inches
Genuine, OEM Dewalt Replacement Part
Dewalt replacement anvil, part number N415874
$234
It performs admirably. It was quickly replaced and the effect was working.
4.9/5
✅ FAST STOCK REMOVAL – Forget about manual woodworking tools for initial shaping or sculpting your blank wood canvas! Make fine cuts, with this 4 inch and 22 teeth Circular Saw Blade you can cut right through wood like butter, and be able to enjoy your family with home and garden decoration accessories created by you. Imagine the happiness in your children’s faces when playing with wooden toys carved by their father.
✅ DON'T GUESS HOW IT WORKS – Many customers had problems with these discs because they didn't know how to use it properly. Most sellers do not give an instruction manuals or directions. Because of this, we have created one with colorful images, in which we describe all steps needed to install the disk on an angle grinder, and how to replace the chain. Also we mentioned the most important precautions and recommendations.
✅ PERFECT GIFT BOX – This product comes in a cool storage Carton Box. Don’t buy the product in non-eco-friendly plastic package ever again. Also storing the disc unpacked can damage your furniture, or your fingers when looking in drawers where you keep the disc. Give your friend the perfect gift with disc packed in this beautiful gift box with a great design.
✅ PROFESIONAL POWER TOOL – In order to create a premium product with a great value we added a laser-printed Tooth Icon on the top of the disc. This icon allows you to detect the wrong installation of the circlet before starting the grinder. It lets you see when the teeth cutting direction and disc rotating direction do not correspond, and avoids damaging the chain.
✅ DON'T STOP SCULPTING – If your side grinder chainsaw wheel attachment gets dull during work, you no longer have stop working to sharpen the chain, simple use the Replacement Circlet that comes in set with the wood cutter disc to replace the one that is worn out. Sharpen the worn out circlet later, because replacing the circlet between the stainless steel plates only take you 1-3 minutes to do.
$234
I bought this as a gift for someone, but now I want to get an angle grinder for myself. This seems to be a smaller, more carefully regulated chainsaw with a softer bite. Even better, it includes a second chain that can be changed in a flash by just pulling out the centre guide. The chains might be sharpenable like any other chain saw chain blade, I'll bet. I'm eager to give it a try.
4.8/5
Fits various Dyson models
This is a Bissell replacement part
This is an O.E.M. authorized part
This is an O.E.M. part
Part Number 965660-01
OEM Part Number 965660-01
$234
The plastic tab release on the dustbin on our Dyson V6 has been one of my biggest pet peeves. It suddenly snapped off one day and spilled all over our floor. After jerry-rigging it for a few days with tape, we ultimately made the decision to acquire a replacement.It took hardly any time at all to install. It is now as good as new. If the same issue occurs to you and you are still inside the warranty period, you might think about contacting Dyson. Otherwise, this item does its function. I just hope that this unit's tab doesn't also break off.
4.7/5
3x 5/8-11 Knotted cup brush, carbon steel, Knotted wire is for heavy material removal, Requires adapter
Constructed with internal holding plate
Provides even balance and smooth performance
Meets demanding quality specifications
Wire is 100-percent inspected
Manufactured in China
Plate ensures consistency and safety
Adds Extra shine to your product
$234
bought two for $9 each because the average hardware store price is $20. I have an OEM midpipe for my Subaru that has been sitting outdoors for months rusting away, but I wanted to shine her up for a better look before I swapped my car in the next few months. This knotted cup for an angle grinder lived up to the high reviews I had heard, and I was not dissatisfied. I didn't want to use an adapter because my old Ryobi grinder has narrower threading, so I got a cheap Porter Cable PC60TAG angle grinder instead, and it worked just fine.The following image depicts how it appears after 30-35 minutes of grinding. Still looks fantastic! When you switch on the power, the knotted wires do disperse automatically by roughly 45 degrees. Even though it's not yet finished, the before-and-after photo shows how well the resonator was polished. It was also simple to maneuver around corners and work on the edge because the knotted threads were somewhat spaced apart. You have two options for applying pressure: flatly or with the edge.One thing is for certain: wear a heavy-duty jacket if possible. If not, layer up. I once had a wire poke through my waterproof Carhartt jacket. I used leather gloves that were covered with rust-related powder, and you should never even consider using this cup without eye protection! It's quite loud, so hearing protection wouldn't be a terrible idea.Overall, I'm quite satisfied with this product and think the cost was justified. I adore how the threads maintained their strength even after 30 minutes and removed the rust that had been accumulating for the previous six months. The polishing will be completed another day, after which I'll apply some rust protection to the midpipe.
4.7/5
This is an O.E.M. part
Part Number N078434
This is an O.E.M. authorized part
Fits various BLACK AND DECKER models
This is a DEWALT replacement part
OEM Part Number N078434
$234
Before you begin, find every YouTube video about replacing the Dewalt impact chuck spring.Overlay your bench with an old, white cloth. The little ball bearing can be lost very easily!No video demonstrates how the ball bearing fits in respect to the spring's tang. The chuck will receive and retain the bit but won't release it if you have the position wrong.The spring's tang is positioned beneath the ball bearing. So, despite being as far from the driver as feasible, the ball bearing is in the groove.In order to re-fit the small circlip, you will require three hands and a variety of extremely small flat screwdrivers. I employed these from Amazon.com:https://www.amazon.com/Choice-9-Piece-Precision-Screwdriver-Phillips/dp/B0747DYJJRAlternately, locate a tiny socket or tube with the appropriate diameter and slip the circlip into the groove and down the shank.
4.5/5
Fits many Black and Decker, Delta and Porter Cable machines
OEM replacement part
Built strong for longer life
Weighs 0.40-pounds
Standard duty replacement part
$234
This charger is excellent because it has an automatic shut-off option. The best feature of this product is the charging-activated light. Now, a nearly discharged battery does require a lengthy charge (9 hours! ), but because the energy is "equalized," it lasts a long time (depending on the condition of the battery being charged).My original B
4.4/5
These hooks could not work with 18v tool.
Package includes 5 Belt Hooks and screws.
Fit for Dewalt 20V power tools.
Fit for DCD980 DCD985 DCD980L2 DCD985L2 DCD740B, DCD740B-B3, DCD740C1, DCD771C2, DCD780B, DCD780C2, DCD780C2-B2, DCD780X, DCD785C2, DCD785C2-B2, DCD785X, DCD790B, DCD790D2, DCD790D2-AR, DCD790D2-B2, DCD790D2-B3, DCD790D2-BR, DCD791B, DCD791B-B3, DCD791D2, DCD791D2-AR, DCD791D2-B2, DCD791D2-B2C, DCD791D2-B3, DCD791D2-BR, DCD795D2, DCD795D2-AR, DCD795D2-B2, DCD795D2-B3, DCD795D2-BR, DCD796D2, DCD796D2-AR, DCD796D2-B2, DCD796D2-B3, DCD796D2-BR, DCD796D2BT, DCD797D2, DCD980L2, DCD980L2-AR,
Strong, fit perfectly.
$234
functions as it should. Just be aware that it won't let you use thick batteries—only small ones—on your tool, which is great by me because I want the tool to be as light as possible if I'm climbing around with a belt full of tools. Of course, the clips will not fit the older 18-volt tools.
3.8/5
Fits 12AMP Blower Vac
$234
functions as it should. Just be aware that it won't let you use thick batteries—only small ones—on your tool, which is great by me because I want the tool to be as light as possible if I'm climbing around with a belt full of tools. Of course, the clips will not fit the older 18-volt tools.
3.7/5
Model 194368-5
The connector kit is also compatible with some other brands guide rails
For best results, it is recommended to use one 2-Piece kit on the bottom of the rail
Guide Rail Connector Kit
$234
These perform as promised and as anticipated. Both the tracks and it do seem a little expensive. If the longer track hadn't been so pricey, I would have purchased it. Instead, I bought this connector and a second short track. I am pleased and would suggest this option.To join two 55 inch Makita tracks, I use one set. Without any adjustments, they are perfectly aligned. Since it is not immediately evident how to use them, it would be preferable if they came with instructions or at least a picture. The two parts must be used in tandem. The other is a little bit shorter, and one has tapped holes for the set screws. When I tighten the set screws to force the pieces apart, they push against the top and bottom of the t-slot. I then fit them together into the track.Because of some less favorable reviews, I almost purchased two sets after reading that you need two. I'm glad I refrained. A single set is adequate. Although there is a second slot on top of the track, it doesn't seem necessary to use two sets because there is little to no lateral strain on the track when you move the saw across the top. With just one set, I feel it to be sufficiently rigid and alignment issues have not arisen. I receive absolutely straight cuts with no indication of the joining of the tracks.
COPYRIGHT © 2019
