22 degree nails can be used in a 21-degree nail gun, but they may not work as well as 21-degree nails. The nails may not fit as snugly in the gun and could come out at an angle.
Yes, you can use 30 degree nails in a 28 degree framing nailer. The 30 degree nails will fit into the magazine of the 28 degree framing nailer and the nailer will drive the nails into the wood just like it would with 28 degree nails.
No, battery powered nail guns do not need to be oiled.
Nail guns that are powered by batteries usually last for around 700 to 800 shots. However, this will depend on the brand and model of the nail gun.
4.6/5
Lightweight - 7.2lbs. for better comfort and control while working overhead or in tight spaces
Guaranteed durability – 50% longer run-time with 7V Li-ion Battery for up to 9,000 nails per charge
All Season Formula - Works in temperatures down to 14°F.
Increased Productivity - Drives nails flush in LVL and other hardwoods that remodelers encounter.
Compact design – Fits between 16″ o.c. studs, joists and roof trusses
$234
I adore this item! Wow, if you're worried that this thing won't have enough power to drive 16s like I was, don't be! This device makes short work of driving nails. You should actually reduce the power a little. So I understand, ex-contractor here. This item is really good. I've driven roughly 5,000 nails, mostly 8 and 16 gauge doug fir and some hard wood, with no jams but plenty of misfires. I'm not sure what that is about, but it occasionally misfires but virtually never jams, which is excellent for any nailer. Runs on fuel for its power and a battery for its spark and, I suppose, cooling fan. Per fuel cell, a claim of 1,000 nails is made. After a long day of heavy use, I didn't count nails but I did some simple math, and it seemed we weren't coming close to that (maybe 500-600), but I don't care because this item is so dang convenient! Since the fuel provides the majority of the power yet both are always required, I charge the batteries every day or two. I read that 9,000 nails could be produced per battery charge, which, if accurate, would need about 15 fuel canisters. Although this instrument is really nice, consumables are incredibly expensive. The same thing always seems to happen, huh? Since I was aware of this going in and since I'm reviewing the gun and not how much the consumables cost, I didn't take away any stars. Just hoping for price reductions due to competition. The gasoline container situation is not as annoying as I had anticipated. Simply make sure you have a sufficient number, and they appear to endure for a reasonable period of time. You don't feel like you're always swapping out fuel cells or anything like. You can be confident that the fuel has power because that is where the nail's driving force comes from. They cost around $10 or a little bit more. I have about 30 power tools, including most of them from Milwaukee, my Dewalt sliding 12" compound mitre saw, my Black
4.4/5
Nailed It: This 21 degree pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional construction contractors and home DIY projects.
Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.
Versatile and Powerful: The framing nailer features depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, and it can also be used to install subfloors, roof decking, wood fencing, and sheathing.
The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
$234
For occasional use around the house, this nail gun is helpful. It was timely and had been packed as usual. The gun is big, yet it's not too heavy. The rifle already has a universal male air fast connect fitting with a dust cap connected to it. Two triggers—one black for use with a single fire and the other red for use with multiple fires—the black trigger is inserted and stays that way. Since I don't use the gun frequently, there is no need to swap out the triggers. I have a more professional grade Makita brad nailer, and some of the same parts are forged and machined, so not as pretty for sure, but this nailer gets the job done. The construction seems well done, sturdy, and beefy. Some parts of the nail head mechanism and rail are a formed or stamped sheet metal design. Recently used to build a storage shed, it effortlessly drives a 3" nail through Douglas fir while operating at roughly 95 to 100 pounds air. 500 nails had no jams at all. Although I don't believe the nail head's inherent aim or precision compares to that of professional guns, this one works well for framing and larger pieces of wood; nonetheless, you won't use it to build cabinets. I deducted one point for nail accuracy, but overall, I think this is a fantastic purchase, especially if you only use it sometimes.
4.4/5
Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
Patented single-action side load canister for fast, one-step nail loading. Adjustable shingle guide for quick shingle spacing
3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty. Operating Pressure : 70 -120 psi
Backed by seven-year limited warranty
Durable yet lightweight aluminum and carbide tips for long life
$234
Although I am aware that some people do not believe it is worthwhile to purchase one of these to install a single roof, I like how you can get an attachment to use this on vinyl siding. Unfortunately, this time there were only two of us the majority of the time, which led me to get this nailer. Normally, when my family repairs a roof, we can easily obtain extra manpower (uncles and grand parents, no cousins because they don't go on the roof -.-).I can admit that this nailer truly makes it easy to lay shingles quickly, which was the goal because we were in a hurry because the winter rainy season was approaching.Okay, now for the actual product. This device is substantial and simple to operate. It's a little unsettling the first few times, but you grow used to it quickly (the kickback and how to line it up). The little air compressor from Lowes is undoubtedly inadequate for use at high speeds, however it was convenient to move my compressor about on the roof (didnt have a long hose). However, since laying the shingles gives the air compressor time to catch up, it worked out nicely for a one-man operation.It occasionally jammed, but a lot of the time it was just how you used it. It tends to jam if the pressure is reduced, but a screwdriver and a hammer can fix it. I would typically use a few coils before it jammed.It does have a convenient feature where you can push the nailer down while maintaining pressure on the trigger, causing it to fire. Although not the safest option, it is a little quicker than repeatedly firing the trigger.Oh... The tip does appear to be prone to rusting, so while I'm waiting for my next roof, I'll clean it and oil or grease it.
4.4/5
Versatile and powerful: the framing nailer features tool-free finger depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, wall sheathing, siding installation, subfloors, pallet building, wood box assembly, and fencing.
Quality and durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.Operating Pressure: 70 – 115 PSI
The right tool for the job: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
Nailed it: This 21 degree Pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional contractors and home DIY projects.
Tough and dependable: we make an array of durable construction Tools and Accessories, including staplers and nailers For siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, BOSTITCH, Senco, Paslode, and DEWALT.
$234
I really debated whether or not to purchase a compressed air tool before using this one, which is my first. What was I thinking, exactly? I'm building a shed, and to be completely honest, I couldn't even think of doing it if I had to manually drive every nail with a hammer. Get a compressed air driven framing nailer right away for any framing project. You won't regret it at all.Although I was unfamiliar with the Freeman brand, I chose it because it was at the lower to medium end of the price range after researching reviews on amazon.com. The 7-year warranty and the fact that it comes with a case appealed to me in addition to the positive reviews. A lot of the competition was eliminated because I really take care of my instruments and couldn't imagine buying something like this without a case.One of the critics who I read made a comment about the tool's appearance. I share your belief that a tool must be attractive in addition to functional. I was amazed by the appearance of the tool when I opened the delivery box and the tool's case. It was nestled so snuggly into the case that was provided, along with a tiny bag of Allen screws and a tiny oil dispenser (you use the oil to instill a few drops into the air inlet of the tool before every time you use it). The tool is an attractive example of well-made craftsmanship, and it looks great.Now let's use the tool. Well, it's far bigger than I had anticipated. I was anticipating something that was approximately the size of an electrical drill because I had never used one of them. No, it is almost 50% larger! and rather hefty (around 8.5 lbs). Not an issue. I am a 5' 5 ", a 160-pound male, carried the weight without any difficulty.Wow, this amazing gadget worked wonderfully as I just finished framing the shed floor! It just inserts those 3" nails with a quiet "poof" sound "! With just a simple turn of the adjusting screw, the depth of the nail can be changed. When the tool is delivered, it has a protection on the nozzle to prevent marking of the working surface. This is a fantastic function, but I discovered that it appears to significantly lower the driving power. Don't use it if you don't care about scratching the work surface. I really adore the option that allows you to divert the exhaust at any 360-degree angle.You will need a compressor to operate this tool if you are new to compressed air tools. The 6 Gallon Pancake Compressor by Bostitch (BTFP02012) that I purchased has worked perfectly. A supplemental kit, such as this Primefit IK2004-2 50-Foot PVC Air Hose with 25-Piece Air Accessory Kit and Storage Case, is unquestionably required.Just a word of warning: the manual is a little light in instructions, so you may need to do some independent research.Well, the Freeman frame nailer has really amazed me, and NO, I have not received any payment for this review. I'm just incredibly happy with this. Purchase it right away!
4.4/5
Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT
Accepts 2" up to 3-1/2" plastic collated framing nails
Lightweight at 7.5 lbs and well-balanced for ease of maneuverability and less user fatigue
Great for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.
The Preferred Pro Brand of Pneumatic Nailers. *Based on the 2014, 2015, 2016, 2017 & 2018 Product Brand Surveys in Builder & Developer Magazine
$234
I was told to use a framing nailer to speed things up when I was building a shed. After giving it a lot of thought and reviewing my options, I ultimately chose this one primarily due of its cost and positive ratings.Normally, I like to use equipment from the same manufacturer, but a bostitch frame nailer is rather expensive and, from my experience, is quite sensitive to the nails used.After the shed is finished, I will have 2 strips remaining of the galvanized 2.5" framing nails that I purchased with this Hitachi. It never jammed.This guy shoots in nails flawlessly flush, straight or angled, with a 90 psi compressor setting.It did speed up my project, and you can blast quite a few nails with a 6 gallon compressor that is not plugged in before it needs to be charged.I noticed that it is a little heavier than usual (just by its weight, but havent used any other framing nailer to compare however so it may just be what it is).I did purchase some lubrication oil, not a sophisticated lubrication kit, which I put into the air opening each time I use it.I'd like to suggest getting a longer air hose for maneuverability, but this isn't a problem with the product per such; it's just something that may have made framing a little simpler.The nose is a little pointed, so wherever you point it, you will see some dents around the nail. This is the only "negative" I would want to point out. This doesn't really matter for wall studs because they are not visible, but for paneling, for example, you can see that a little (although easily fixible with some caulk afterwards). There might be a nose cap for it, but it costs about $20! To be honest, I would have anticipated that this would come with the package, but whatever.
4.3/5
2 nailers in one: includes two quick-change nosepieces, converts to framing or metal connector applications
1-1/2-inch to 3-1/2-inch framing nailer; 1,050 inch-pounds of driving power; sequential and bump trigger
Lightweight magnesium housing; integrated rubber skid pads; rubber grip
14-1/4 by 20-1/2 inches; 8.1 pounds.Operating Pressure:80 - 120 psi
Compressor/Air Tool Features: Fastener Collation,Fastener Depth Control, 1-1/2-inch to 3-1/2-inch framing nailer; 1,050 inch-pounds of driving power; sequential and bump trigger
Includes 1 framing nailer; Power Source: Pneumatic
2 nailers in one: includes 2 quick-change nose pieces, converts to framing or metal connector applications
$234
Since I am a novice remodeler, I am not as harsh on my tools as a professional would be. I oil my pancake compressor every day I use it, and I have it set to deliver 120 PSI. With this beast, I've probably gone through 6,000 nails without experiencing any problems that weren't self-inflicted. I've never even experienced a jam. The plastic rafter hook, which feels like it would break off quite easily, is the tool's one flaw. For installing joist hangers, the metal connector attachment is fantastic. Changing tips and nails is quick and simple, and using nail-strips that have already been used up pose no problems. Use DeWalt nails, please.To all the other beginners out there: It's remarkable how heavy 8lbs can seem when you're uncomfortably wrapped around studs and rafters with your arm extended out to the side. I've just used finish nailers so I have nothing to compare it to. Although it is quite useful in small areas, there are apparent restrictions on its application, so I decided to pair it with a palm-nailer. It should go without saying, but if you don't already have safety glasses, get some; I can't tell you how many times pieces of the plastic nailing strips have smacked me in the face.
4.2/5
Over-molded rubber grip for added comfort, better hold and reduced vibration
Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT
Magnetic nose holds a fastener in place for safe and accurate fastener placement
Accepts a 2-1/2" - 3-1/2" bulk nail
360 degree swivel fitting for maximum maneuverability and ease of use
$234
I didn't believe anything that fits in your palm could drive a nail in. But I bought it because it was cheap and I needed something for a little space.Without it, I would never have been able to drive nails under subfloors or in between joists. The nailer works flawlessly although I'm using a teeny-tiny small air compressor that I purchased 15 years ago. Anywhere you can find an extension cord, you can take the palm nailer with you.For those who are weaker, this is fantastic. It's fantastic in my girlfriend's opinion and she utilizes it. She needed some time to become accustomed to the tool. After becoming accustomed, she began hammering in nails that were extremely difficult for her to drive. much anger was avoided.Two problems have I found. (1) On occasion, if the compressor has low pressure, the item will simply leak air. When the compressor pressure reached 100 psi, I unplugged it and then plugged it back in. (2) The speed isn't as quick as when I use a hammer and do excellent swings. I can drive a ten-penny nail home with four solid swings. I have to wait for the air compressor and this thing moves a little more slowly. But far too often I simply don't have enough space to get a solid swing, and the palm nailer drives it in much more quickly than I can. wonderful for the attic.If you want to acquire quickly, invest in a decent $200 nail gun. This is the tool you need if you need something for operating in unusual locations or under unfavorable circumstances.Highly suggested.
4.2/5
Easy to use
The product is manufactured in United States
Driving power: 1050 inch pounds; pushbutton depth of drive
2 to 3 1/2 inch framing nailer
Magnesium housing for durability; weighs 7.6 pounds
28 degree Wire Collated Stick Framing Nails. Thread Fitting Type 1/4 inch NPT. Magazine Capacity 100 Nails
The product is Stick Framing Nailer
$234
Given the right lubrication, this cannon operates effectively and will last a long time for you. As a self-employed contractor, I have had one for over ten years and use it to frame houses, construct pole barns, and construct docks. I like that fasteners are readily available (common 8d-16d and galvanized ringshank 8d-10d). Mine has been dropped numerous times upon large stone (#2s) and even concrete from a height of up to 40 feet with no damage ever. It has spent a lot of time underwater. A good degreasing and re-lube has always solved my problems with air leaks or feeding. Since I didn't think my original gun would last much longer of my abuse, I got a second one (at an incredible Amazon offer) to keep on the shelf. However, it has survived for another 18 months!
4/5
Sequential or bump operating modes
Brushless Motor and engine design provides the power to drive 3-1/2" nails
Dual Speed optimizes the motor for different nail lenghts
Model number DCN692 and DCN692B are same
33? magazine holds up to 55 paper collated nails
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
$234
I'm just a typical do-it-yourself homeowner; I'm not a builder. I got this about a month ago because I didn't want to carry my compressor and pneumatic pistol up into the attic for a sizable remodeling project. I have quite a few FlexVolt tools, so I am quite heavily invested in the batteries, and they have been incredibly reliable and versatile instruments. I must admit that I enjoy the flexibility of changing the batteries as needed, and I have more than enough of them to operate my oscillating tool, drill, and saw with little to no switching.As I read the evaluations, I became alarmed by the sheer amount of comments about regular clogs and incomplete nail driving. But I went ahead and bought it (happy birthday to me). It cost MUCH less than the large box retailer and was delivered on schedule, in perfect shape, and with care.I followed the instructions after reading them (surprise!) and went up to the attic. I ordered 3 1/4" and 2 1/2" length GripRite brand nails. I excitedly started firing away after loading the gun with 3 1/4" but stopped after the first shot. Yes, the dreaded incomplete drive and jam struck me. I fired around 10 additional rounds, all of which had the same outcome despite my having increased the depth of drive. I was going to throw it across the attic when I noticed the nail selector switch at the bottom of the handle. Then it dawned on me. Setting #1 is for short nails, while setting #2 is for longer nails. Setting 1 uses less power so the nails aren't overdriven. Setting 2 is noticeably more strong and utilises the whole power. So I changed to setting 2 and adjusted the depth of drive, and presto — properly driven nails. After that, I spoke to my kid about the value of reading the instructions before really adhering to them. Since then, I've only had one jam, and it was probably caused by the way I was holding it. Otherwise, each nail has been carefully positioned.I could be mistaken, but the majority of the negative reviews appear to confirm my initial impression. I believe they had the selector switch set for the wrong nail. The unit was sent in position 1, and I believe most folks are utilizing longer framing nails. Consequently, it is very simple to make the error, but happily, it is also quite simple to fix. When you grip the gun, the selector switch is nicely concealed (behind or beneath your fingers), but it is in no way concealed.Overall, this is a really sturdy item that is well suited for DIY projects. I also think it would work well for building. I've had the 6 AH battery loaded for approximately two weeks and haven't yet recharged it. Compared to carrying the compressor up stairs, handling the hose, and waiting for the compressor to recharge, it is SO MUCH more practical. However, it is a little hefty while operating above your head.Overall, I consider this to be a very reliable unit that can more than keep its word. I'll risk sounding like a DeWalt shill by saying this, but I HIGHLY suggest this nail gun.My experience with the DeWalt FlexVolt framing nail gun is exactly described in this article, which I did not acquire for free or at a reduced price.
There is no definitive answer when it comes to the question of how long nails should be for framing. It ultimately depends on the project you're working on and the materials you're using. That said, most experts generally recommend using nails that are 3-4 inches long for most framing projects.
A battery powered framing nailer is worth it if you value your time and money. With this tool, you can complete your projects faster and easier. You'll also avoid the hassles and expense of having to rent a compressor.
There is no definitive answer to this question as it depends on the project you are working on and what you are trying to achieve. If you need a stronger hold, then screws are the way to go. If you are working on something that is less structural, then nails may be sufficient. Ultimately, it is up to the individual to decide which method is best for the project at hand.
There is no definitive answer to this question as it depends on the project you are working on and your personal preferences. Some people prefer ring shank nails for framing projects because they are less likely to pull out over time. Others find that regular nails work just fine and are more affordable. Ultimately, it is up to you to decide which type of nail is best for your project.
If you're joining two pieces of wood together, you have the option of using either screws or nails. Both have their advantages and disadvantages. Nails are much faster to install than screws. They're also less likely to strip out, which can be a problem with softer woods. On the downside, nails are more likely to pop out over time, especially in high-vibration areas. They're also not as strong as screws. Screws are stronger and more durable than nails. They're also less likely to pop out over time. However, they
A framing nailer is a tool that is used to drive nails into wood. It is a type of power tool that is powered by either air or electricity. The most common type of framing nailer is the pneumatic nailer, which uses air pressure to drive the nails.
COPYRIGHT © 2019
