5/5
Ideal to plug open-ended 3 in pipes
Plastic mechanical plugs are premium plugs designed to hold higher pressures
Galvanized mechanical plugs have a wide usage range making them effective on most piping material
Use to seal piping or to hold pressure while testing a piping system
Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized
Plastic plug body has minimal rusting or corroding
$234
I created a widget to uncoil coiled tubing. This was one of the seven missing cogs. For me, tube sizes 1" and under work fine. It was used to create copper pipe air coolers, straighten stainless steel fuel line coils, create transmission coolers, and create coated brake lines. Although not the designers' intention, I think the quality of the rubber and molding used for this project is unmatched.
4.8/5
Easy to install 2"x2" snap-in plugs serve as a long-lasting solution for many household or outdoor projects including replacements for fence/fencing railing posts, gate rail post covers, trailer frame ends, pole pipe rod caps, metal bike rack fittings, wrought iron steel finishing plugs, or any sqaure opening.
Fits 2" (two inch) OD square tubing (2x2) with INSIDE hole diameters (ID) from 1 3/4" to 1 15/16" ( 1.75" to 1.93") and wall thickness of .040" - .123" (10-20 Gauge)
These high-grade Prescott Plastics black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliders, chair leg protectors, patio furniture inserts, and much more. They are also designed to hold up against impact abuse, and harsh weather conditions.
$234
I used them on a project that called for 2" square tubing with a 1/8" wall. Although I usually use steel plugs, I didn't on this job because I might later decide to remove them when making a modification. Because they are so much simpler to use than manufacturing plugs and they really give your project a professional look, I want to utilize them more frequently in the future.
4.7/5
These high-grade Prescott Plastics black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliders, chair leg protectors, patio furniture inserts, and much more. They are also designed to hold up against impact abuse, and harsh weather conditions.
Fits 1" (one inch) OD square tubing (1x1) with INSIDE hole diameters (ID) from 3/4" to 15/16" (75" - .93") and wall thickness of .042" - .122" (10-20 Gauge)
Easy to install 1"x1" snap in plugs serve as a long-lasting solution for many household or outdoor projects including replacements for fence/fencing railing posts, gate rail post covers, trailer frame ends, pole pipe rod caps, metal bike rack fittings, wrought iron steel finishing plugs, or any sqaure opening.
$234
Price, appearance, shipping speed, and repair of Amsco kitchen stool legs that were missing some end caps and causing our kitchen's white oak floors to scrape were all excellent. Three minutes were needed to fix three stools. Additionally, a spare fit my 20-year-old NordicTrak ski machine that was missing its end plugs. Just make sure you take accurate measurements of the tube steel legs' internal and outer dimensions, as there are different sizes for the end caps. Thanks!
4.6/5
These high-grade Prescott Plastics black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliders, chair leg protectors, patio furniture inserts, and much more. They are also designed to hold up against impact abuse, and harsh weather conditions.
Fits 1" (one inch) OD square tubing (1x1) with INSIDE hole diameters (ID) from 3/4" to 15/16" (75" - .93") and wall thickness of .042" - .122" (10-20 Gauge)
Easy to install 1"x1" snap in plugs serve as a long-lasting solution for many household or outdoor projects including replacements for fence/fencing railing posts, gate rail post covers, trailer frame ends, pole pipe rod caps, metal bike rack fittings, wrought iron steel finishing plugs, or any sqaure opening.
$234
I assembled a canopy bed entirely with the help of the Kreg Jig system. I went ahead and stained/polyd my bed pieces and built the bed since I didn't want to put off creating the bed while I was waiting for these to arrive. These were delivered, and I stained and polyd them to match. Some of them fit wonderfully, but I had more than 60 to fill, and many didn't fit perfectly because of incorrect drilling or screws that were positioned too far out, for example. If your hole is properly sized, these will fit flawlessly and be almost invisible, but if you are off by even a millimeter, these will be off. It is also possible for something to go wrong and cause the hole to be slightly off. If I had placed them first, sanded the entire piece, and then completed everything, there wouldn't have been a problem. They would not have been seen. Fortunately, my wood is very dark, making the ones that stick out little difficult to see at first inspection. I give it five stars since they are excellent and the KREG system is outstanding. I'll use them once more, but I'll know better to wait until everything is completed before staining, polyurethaning, or painting.
4.4/5
Covers up joint pocket holes
50-Count-packages
Plugs require minimal sanding to match pocket angles
Package sealing prevents warping from moisture
Made from accurate dowel for minimal sanding
$234
The pocket hole jig was not created by Kreg, but they did make it widely accessible.A pocket hole jig is a fantastic addition to any shop, and Kreg provides these little plugs to make it even better by making it simple to fill your holes once you're finished.When I was reading the evaluations the last time, I seem to recollect that some people were complaining that the plugs were too lengthy and that they had to spend a lifetime grinding them down once they had been bonded in place.Guys, that was on purpose done by the generous people at Kreg; one size fits all. The majority of do-it-yourselfers probably use standard 3/4 inch stock, but the pocket hole jig works well with a wide range of material thicknesses and these plugs are designed for use with both thick and thin stock.At cut 3/4-inch material, I either set my little chop saw to about 30 degrees (with a scrap piece of wood on the backing to hold the plug firm against) or I lop off roughly a quarter-inch from the plug's fat end. With my small band saw or scroll saw, I can swiftly cut out a chunk if I'm in a hurry or only need one or two plugs.Place a small amount of glue in the gap and lower the plug until it is nearly flush.That is as simple as it gets.
4.2/5
Made of durable black plastic.
Made in USA.
Quantity 10: 1/4"
Quantity 5: 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2"
Plugs fit sheet metal up to 1/10" thick.
$234
I used these to patch holes in a 2011 Crown Victoria used by retired cops. Five holes were precisely sized for one size, and I simply added superglue to the plugs' lips. The caps were then painted white to match the automobile by my wife using acrylic paint. From a distance, it appears excellent, but up close, it is definitely a janky work. Although three additional holes had to be expanded with a Dremel because they were in between sizes, everything turned out great. This was a really simple and inexpensive fix, but if you spent more time on it, it would undoubtedly look much superior. After washing it, the automobile was entirely watertight. Given that it functions admirably, I only gave it four instead of five stars. Time will tell how lifespan will fare in comparison to the sun's UV radiation! So far, so good!
4.2/5
Ideal for filling in those unsightly screw holes; can be installed easily with wood glue
Slightly tapered plug body ensures a tight secure fit
When fully seated, the domed, button head protrudes above the wood surface and over the screw hole edge adding a more decorative look
Wood grain runs in the direction of the plug width for best match; paint or stain for a perfect wood-color match or for accentuated contrast
Can be used for a variety of craft, woodworking and furniture projects
$234
These tiny wooden buttons are used by my husband in a variety of woodworking projects. He constructs banks that resemble 1890s-era homes, businesses, and railroads. The buttons can be transformed into whatever he can think of, including train headlights, post ornaments, and wheel hubs. If you're lacking in creativity, you could use them to conceal a screw head on a piece of furniture.
4.1/5
Fits securely- slightly tapered plug body ensures a tight secure fit and can be installed easily with wood glue
Flush finish- When fully seated, The plugs form a flush finish
Paint or stain- for a perfect wood-color match or for accentuated contrast
Fusc ethically sourced hardwood- wood grain runs in the direction of the plug width for best match
Fills screw holes- ideal for filling in unsightly screw holes
$234
These were much too small for the carpenter bee holes we have in our deck, but I ordered them because another reviewer said they worked great for their carpenter bee holes. Nevertheless, I gave the product 5 stars because it is exactly as claimed and serves other needs.
4.1/5
3/8" (0.375 inch) Flush Mount Black Plastic Body and Sheet Metal Hole Plug - Qty 25
$234
My CT100U Mini Bike has aftermarket suspension front forks, so the OEM front fender did not bolt on directly, so I bought a new CT100U Mini Bike rear fender and had to drill new mounting holes into it. Because the rear fender had holes in it from the original mounting holes, I hated how it looked, so I bought these 3/8" sheet metal hole plug kits to use on my CT100U Mini Bike front fender. They are of outstanding quality and appear to be durable for many years of use. They also hold firmly, which I needed for my off-road riding. I heartily urge everyone to buy this product from this Amazon seller.
COPYRIGHT © 2019